Nuts, Bolts & Fixings

  • Brake Banjo Bolt M10 x 1.25
    Brake Banjo Bolt M10 x 1.25
    10mm thread x 1.25 pitch Includes 2 x washers. For use with hydraulic (oil) brake systems. Fits most Chinese import Pit / Dirt bikes. 10mm thread x 1.25 pitch Includes 2 x washers. For use with hydraulic (oil) bra...
  • Chain Slider Screws
    Chain Slider Screws
    This set contains; 3 chain slider screws. Set fits RT1, TMR, TMX and NIPPA, FS140, FS110 Direct OEM replacement or high quality spares upgrade for your pit bike.      SD3 This set contains; 3 chain slider screws. Set fits RT1, TMR, TMX and NIPPA...
  • M6 x 20mm Hex Bolts
    M6 x 20mm Hex Bolts
    This set contains; 4pcs of M6 hex bolts Thread length; 20mm Direct OEM replacement or high quality spares upgrade for your dirt bike.      SD3 This set contains; 4pcs of M6 hex bolts Thread length; 20mm Direct OEM rep...
  • Plastics Bolt Set ( x 4 Bolts)
    Plastics Bolt Set ( x 4 Bolts)
    This set contains; 4 Allen key bolts. Set fits RT1, TMR, TMX and NIPPA Direct OEM replacement or high quality spares upgrade for your pit bike.    SD3 This set contains; 4 Allen key bolts. Set fits RT1, TMR, TMX and NIPPA Dir...
  • Brake Disc Bolt Set ( x 4 Bolts)
    Brake Disc Bolt Set ( x 4 Bolts)
    M8 Pit Bike brake disc bolts for fitting SDG brake discs.  Set of 4 hardened zinc plated bolts 22mm long  M8 thread  Direct replacement or high quality spares upgrade for your pit bike.    A3-01 M8 Pit Bike brake disc bolts for fitting SDG brake discs.  Set of 4 harden...
  • Fork Guard Screws
    Fork Guard Screws
    This set contains; 6 fork guard screws. Set fits RT1, TMR, TMX and NIPPA Direct OEM replacement or high quality spares upgrade for your pit bike.      SD3 This set contains; 6 fork guard screws. Set fits RT1, TMR, TMX and NI...
  • Frame Cap - Nippa
    Frame Cap - Nippa
    Genuine KÜRZ spares Plastic cap insert designed for covering rear swing arm bolt Dimensions Diameter: 28mm Length: 16mm Inner diameter: 18mm Made to fit: KÜRZ NIPPA 50A Included in the set: 1 Frame Cap Top tip: soak in boiling water for 15 seconds before inserting for a snug fit.   SD14 Genuine KÜRZ spares Plastic cap insert designed for covering rear swing ar...
  • Exhaust Studs M6
    Exhaust Studs M6
    Set of 2 M6 exhaust studs with cap nuts. These screw into the cylinder head allowing the exhaust to be connected. Made from tempered steel for heat resistance. Please check measurements are to suit your engine.   L4-01 Set of 2 M6 exhaust studs with cap nuts. These screw into the cylinder hea...
  • Exhaust Studs M8
    Exhaust Studs M8
    Set of 2 M8 exhaust studs with cap nuts. These screw into the cylinder head allowing the exhaust to be connected. Made from tempered steel for heat resistance. Please check measurements are to suit your engine.   L4-02 Set of 2 M8 exhaust studs with cap nuts. These screw into the cylinder head all...
  • Sprocket Bolt & Plate Set - SDG
    Sprocket Bolt & Plate Set - SDG
    Genuine FACTORY™ sprocket bolts set.  Set of 4 bolts with bolt retaining plates. Thread length 25mm M8 thread  Direct replacement or high quality spares upgrade for your pit bike.   A6-03 Genuine FACTORY™ sprocket bolts set.  Set of 4 bolts with bolt&...
  • Plastics Bolt Screw Set
    Plastics Bolt Screw Set
    This set contains; 10 Allen key bolts. 3 Front fender bolts. 4 Nuts. 2 washers. Set fits KURZ RT1, TMR, TMX and NIPPA Direct OEM replacement or high quality spares upgrade for your pit bike.      SD3 This set contains; 10 Allen key bolts. 3 Front fender bolts. 4 Nuts. ...
  • Wheel Axle 15mm - 220mm Long
    Wheel Axle 15mm - 220mm Long
    Genuine KURZ axle  Length: 220mm  Thickness: 15mm  Made to fit: KÜRZ NIPPA 50A KÜRZ TMX 125 KÜRZ TMR 140 KÜRZ RT1 Included in the set: 1 x 15mm axle and nut Note: Please check that you require a 15mm axle. There are two main sizes, 15mm and 12mm.      SD9 Genuine KURZ axle  Length: 220mm  Thickness: 15mm  Made to ...
  • Wheel Axle 15mm - 215mm long
    Wheel Axle 15mm - 215mm long
    Genuine KURZ axle  Length: 215mm  Thickness: 15mm  Made to fit: KÜRZ NIPPA 50A KÜRZ TMX 125 KÜRZ TMR 140 KÜRZ RT1 Included in the set: 1 x 15mm axle and nut Note: Please check that you require a 15mm axle. There are two main sizes, 15mm and 12mm.      SD9 Genuine KURZ axle  Length: 215mm  Thickness: 15mm  Made to ...
  • Swing Arm Axle Set - Type 1
    Swing Arm Axle Set - Type 1
    Genuine KÜRZ swing arm axle set  Length: 200mm (Bolt head not included) Diameter: 10mm  Made to fit: KÜRZ NIPPA 50A KÜRZ TMX Included in the set: 1 x 10mm axle, nut, bearings and washers.   SD14 Genuine KÜRZ swing arm axle set  Length: 200mm (Bolt head not in...
  • Swing Arm Axle Set - Type 2
    Swing Arm Axle Set - Type 2
    Genuine KURZ swing arm axle set  Length: 240mm (Bolt head not included) Diameter: 10mm  Made to fit: KÜRZ RT1 Included in the set: 1 x 10mm axle, nut, bushes     SD1 Genuine KURZ swing arm axle set  Length: 240mm (Bolt head not included) Di...
  • Swing Arm Axle Set - Type 3
    Swing Arm Axle Set - Type 3
    Genuine KURZ swing arm axle set  Axle: Length: 215mm (bolt head not included) Diameter: 12mm  Spacer: Length: 161mm  Thickness: 20mm  Hole size: 12.5mm Made to fit: KÜRZ FS 140 Included in the set: 1 x 12mm axle, nut, spacer     SD1 Genuine KURZ swing arm axle set  Axle: Length: 215mm (bolt head not includ...