Now your ride doesn't have to end when the sun goes down! DBR offers a complete bolt-on, plug-in enduro lighting kit to fit almost any pit bike that doesn't come stock with factory lighting.
The DBR motorcycle enduro lighting kit is designed to be a simple way to provide headlights, tail/brake lights, horn, ignition and indicators for your motorcycle. The components have universal applications and will work on almost any motorcycle with minor modifications. The kit is intended for motorcycles with existing 12v supply feed from the engine.
The DBR motorcycle enduro lighting kit is easy to install and does not require cutting into or messing with your motorcycle’s existing wiring as this is all replaced with a whole new replacement wiring harness.
NOTE** The loom supplied with this kit is suitable for electric start bikes and will connect directly to your existing battery.
NOTE** Does not come supplied with starter solenoid or battery! - These can be purchased separately.
Kit comes complete with:
KTM style E marked headlight 35w/35w/5w.
Rear/brake light assembly with number plate mount.
Complete wiring harness.
Multifunction bar switch (kill/horn/lights/indicators).
4 x indicators
12v D/C horn
Key switch ignition
Hydraulic rear brake switch
Mounting hardware and cable ties
Detailed installation instructions
Headlight available in stock OEM colours (black, white, orange, green)
Note: These kits will only work with bikes that already have a 12v power supply from your engine. If not you will require a 12v stator assembly and suited flywheel to give your light kit the required power. Please check the wires from your engine, A good indication would be to find 1 yellow & 1 white wire or 2 yellow wires that are not being used, these are to power your kit.
Also your bike should already have a 5 pin cdi.
If you have neither of these you will need to replace the standard stator and CDI. See our 'Racing stator, flywheel & CDI kit' that will suit this light kit perfect.