Stator Coil – Kick Start – YX 140

12v Stator/magneto with 3 wires.

100% Copper stator magneto pole alternator current (AC)
Coil material - copper
Wire length - approx. 30cm
Shaft hole size - 18mm
Plate size - 115mm
Screw hole centres - 102mm
Copper wire diameter - approx. 1mm
Suited for - YX140 plus more

Check this part matches your existing stator coil before ordering (does not fit lightweight type flywheel)

Think your stator is faulty? Here are two things we recommend testing with the use of a multimeter.

Firstly, unplug your stator plug from your bikes wiring loom and carry out all tests on your stator wire plug that comes from the engine.

1. Turn your multi-meter to 2000ohms then taking the red wire from the multi-meter, make contact with the blue/white wire coming from the stator, also taking the black wire from the multi-meter make contact with the green wire coming from the stator (please note for this test your engine does not need to be running). You should now see a reading of over 100ohms on your multi-meter, if not you're stator is faulty.

2. Testing voltage, turn your multi-meter to 20v then taking the red wire from the multi-meter make contact with the black/red wire (live) coming from the stator, also taking the black wire from the multi-meter make contact with the green wire (earth) coming from the stator, now while 'KICK' starting the engine with normal starting effort you should see a voltage reading on the multi-meter typically spiking at 3v or more, if not your stator is faulty.