Ignition Coil – Black – 2 Bullets

High-specification 12v ignition coil.

Fitment - 2 Bullet connectors & 1 central mounting bolt - to fit motorcycle engines.

This is a high-quality specification spark ignition coil pack and high-quality specification triple core HT lead, designed to give highly reliable firing speeds and electrical pulses passed to the spark plug for combustion.

To fit many motorcycles ranging from 50cc - 250cc

Easy to install, no instruction needed!

Please check the specifications, these will fit most motorcycles, dirt bikes, ATVs or pit bikes.

Please check that your motorcycle has 2 bullet connectors before purchase.

This is a direct high quality replacement for your existing coil.

TECHNICAL INFORMATION:

If you suspect your ignition coil might be faulty and want to test it before ordering a replacement, here's a quick guide:

1. **Primary Coil Test:**
- Set your multimeter to 200Ω.
- Touch one test probe to the earth terminal (green) and the other to the live feed terminal (black/yellow).
- A reading below 5.0 ohms indicates a functioning coil. If the reading is above this, consider replacing the coil unit.

2. **Spark Connection Continuity: (Spark Connection Continuity)**
- Set your multimeter to 20KΩ.
- Touch one test probe to the live (green) terminal and the other to the metal spark plug connection inside the spark plug cap.
- A reading below 10K ohms indicates a functioning coil. If the reading is above this, assume the unit is not functioning correctly.

Before replacing the entire unit, ensure the cable is correctly screwed into both the spark plug cap and the ignition coil unit:

1. Unscrew the lead at both ends by turning it anticlockwise.
2. Inspect the cable ends and ensure the internal copper core is making good contact with the screws. If not, trim 10mm from each end with wire cutters.
3. Screw the lead back centrally for a secure connection.

By following these steps, you can confidently diagnose your ignition coil's condition before making a purchase.